BACK
4″ Cone Tapered Coupling
The CT, cone tapered, coupling is similar to the stepped coupling just above, and is designed for mounting to the sidewall of a fiberglass tank. In this case the coupling is designed to minimize the lay-up required to tapper from the coupling to the sidewall of the tank.
Can't find exactly what you need?
Custom options are available!
Call us today: 888-960-6289
BACK
4″ Cone Tapered Coupling
The CT, cone tapered, coupling is similar to the stepped coupling just above, and is designed for mounting to the sidewall of a fiberglass tank. In this case the coupling is designed to minimize the lay-up required to tapper from the coupling to the sidewall of the tank.
- CC CT-Couplings are a special tapered coupling designed to aid installation by improving alignment and including the initial buildup needed on straight sided reverse tapered couplings. This will normally permit going directly to the lay-up sequence.
- CC CT-Couplings are hand laid-up Fiberglass Reinforced Plastic Couplings for threaded tank and pipe connections.
- CC CT-Couplings are produced to exacting requirements resulting in a superior void-free laminate and resin-rich liner.
- Reinforcement is continuous throughout
- OD: machined surface for tolerance (± 1/1 6-inch) for ease of installation
- Threads are glass wound over liners to ensure durability
| Weight | 1 lbs |
|---|---|
| length | 2.4 in |
| outside diameter | 5.7 in |
| inside diameter | 4.757 in |
| length inside diameter | 1.99 in |
| thread | Single Threaded |
| wall thickness | 0.5 in |
| tapered dimension | 5.145 in |
| resins | Hetron 922 |
| psi | 150 psi |
| nexus liners | Single Nexus/ C-Veil Liner |
- Construction: Hand Lay-up with Molded NPT Threads
- Resin: Hetron 922
- 100-Mil Nexus/C-veil liner