CC-U-Vents
FRP Tank Vents

CC-U-Vents are hand laid-up with fiberglass reinforced plastic to meet PS-15-69. They are produced to exacting requirements resulting in a superior void-free laminate and resin-rich liner. CC-Elbows are produced from long radius elbows with the radius equal to 1.5 times the ID.

Home About Products Links Contact Site Map

Fiberglass Grating

Flanges

Home > Products > Fittings- U-Vents

CC-U-Vents Specifications:

Pressure Rating: exceeds 150 psi with 10:1 safety factor
Reinforcement is continuous throughout
Construction: Hand Lay-Up
Resin: Hetron 922, Derakane 411, & Derakane 411 BPO-DMA
100-Mil Nexus/ C-Veil Liner

Corrosion Resistance Guide
for Hetron Resins

Corrosion Resistance Guide
for Derakane Resins

U-VENT SPECIFICATIONS
ITEM	Pressure Rating (psi)	Inside Diameter-Min ID (Inch)	Outside Diameter OD (Inch)	Sweep Diameter DIA (Inch)	Overall Height OH (Inch)	Pipe Length PL (Inch)	Wall Thickness- MIN (Inch)
CC-U-VENT 2.0"	25	2.000	3-3/8	8-3/8	14-3/16	10	3/16
CC-U-VENT 3.0"	25	3.000	3-3/8	12-3/8	16-3/16	10	3/16
CC-U-VENT 4.0"	25	4.000	4-3/8	16-3/8	18-3/16	10	3/16
CC-U-VENT 6.0"	25	6.000	6-1/2	24-1/2	21-1/2	10	1/4
CC-U-VENT 8.0"	25	8.000	8-1/2	32-1/2	26	10	1/4

CC-U-Vents are hand laid-up with fiberglass reinforced plastic to meet PS-15-69

This information is provided as a guide to the use and application of CC-Elbows and is not or does not represent a specific warranty of the product or its performance. The designer or user must determine the suitability of this product for a specific application.

CC-U-Vents FRP Tank Vents

CC-U-Vents
FRP Tank Vents