2" Thick CC-Grate
2" x 2" (Square Mesh)

The CC-Grate 2" grating pattern are specially designed for maximum stiffness and strength without excessive weight. The square mesh pattern also means efficient panel utilization and ability to handle loads in both directions - Ideal for longer spans or heavier loads.

• Resin systems available:

  • General Purpose-Polyester

  • Isophthalic-Polyester

  • USDA Certified

  • Vinyl Ester

• Physical Dimensions:

  • Center-Center:                                  2” x 2”

  • Bar Height:                                            2.0”

  • Tie Bar Width:                                  0.3125”

  • Bearing Bar Width:                           0.3125”

  • Open Area:                                           71 %

  • Panel Wt. (4'x12') (Men./Grit):    190/215 lbs.

  • Wt/sf (Men./Grit):                     4.0/4.5 lbs./sf

• Available in both Grit and Meniscus Surfaces

• Fiberglass Grating Deflection Data (Click here for data)

Installation Notes:    All fiberglass grating should be fastened to the supports using CC-Clips fasteners. These should be used every 3’-4’ along the supports, with a minimum of four clips on small sections. CC-Clips not only add safety for the employees using the grating, but also improve on the deflection.

2" Grating
(2" x2" Mesh Pattern)