1" Thick CC-Grate
1.5" x 1.5" (Square Mesh)

The CC-Grate square mesh patterns have the advantage of cost for a one inch thick fiberglass grating along with the fabrication advantages of the square mesh pattern.   It is good for flooring, machine housings, fabrications and similar applications requiring strength in both length and width directions.

• Resin systems available:

  • General Purpose-Polyester

  • Isophthalic-Polyester

  • USDA Certified

  • Vinyl Ester

• Physical Dimensions:

  • Center-Center:                            1.5” x 1.5”

  • Bar Height:                                            1.0”

  • Tie Bar Width:                                     0.25”

  • Bearing Bar Width:                              0.25”

  • Open Area:                                           69 %

  • Panel Wt. (4'x12') (Men./Grit):    130/150 lbs.

  • Wt/sf (Men./Grit):                     2.7/3.1 lbs./sf

• Available in both Grit and Meniscus Surfaces

• Fiberglass Grating Deflection Data (Click here for data)

Installation Notes:    All fiberglass grating should be fastened to the supports using CC-Clips fasteners. These should be used every 3’-4’ along the supports, with a minimum of four clips on small sections. CC-Clips not only add safety for the employees using the grating, but also improve on the deflection.

1" Grating
(1.5" x1.5" Mesh Pattern)