Home
About
Products
Customer Service
Contact Us
Site Map

1.5" Thick CC-Grate
1.5" x 1.5" (Square Mesh)

The CC-Grate 1.5" square mesh pattern is the industry standard in both thickness and pattern. The square mesh pattern provides strength in both directions for more efficient utilization and easier fabrication. Panel sizes can be up to 5' x 13'.

(Click links above for larger view)
Deflection Data: 1.5"(1.5x1.5)
 

 

Home   About   Products   Links   Contact   Site Map

Copyright © 2006 Century Composites, Inc. All Rights Reserved

Century Composites
Home > Products > Grating-1.5"

 

  • Resin systems available:

    • General Purpose-Polyester

    • Isophthalic-Polyester

    • USDA Certified

    • Vinyl Ester

  • Physical Dimensions:

    • Center-Center:                            1.5” x 1.5”

    • Bar Height:                                            1.5”

    • Tie Bar Width:                                 0.3125”

    • Bearing Bar Width:                          0.3125”

    • Open Area:                                           63 %

    • Panel Wt. (4'x12') (Men./Grit):    185/215 lbs.

    • Wt/sf (Men./Grit):                     3.9/4.5 lbs./sf

  • Available in both Grit and Meniscus Surfaces

Installation Notes:    All fiberglass grating should be fastened to the supports using CC-Clips fasteners. These should be used every 3’-4’ along the supports, with a minimum of four clips on small sections. CC-Clips not only add safety for the employees using the grating, but also improve on the deflection.
1.5-inch mesh grating pattern

Corrosion Resistance Guide

Fiberglass grating standard surfacesFiberglass grating standard surfaces
Grating Standard Surfaces

1.5" Grating
(1.5" x1.5" Mesh Pattern)