1" Thick CC-Grate
1" x 4" (Rectangular Mesh)

The CC- Fiberglass Grate rectangular mesh patterns are considered heavy-duty because they have the advantage of greater load capacity and improved resistance to mechanical damage. Bearing bars are thicker than other 1" x 4" pattern grating to ensure greater load capacity.

Resin systems available:
- General Purpose-Polyester
- Isophthalic-Polyester
- USDA Certified
- Vinyl Ester

Physical Dimensions:
- Center-Center: 1.0” x 4.0”
- Bar Height: 1.0”
- Tie Bar Width: 0.50”
- Bearing Bar Width: 0.25”
- Open Area: 65 %
- Panel Wt. (4'x12') (Men./Grit): 175/200 lbs.
- Wt/sf (Men./Grit): 3.6/4.2 lbs./sf

Available in both Grit and Meniscus Surfaces

Fiberglass Grating Deflection Data (Click here for data)

Installation Notes: All fiberglass grating should be fastened to the supports using CC-Clips fasteners. These should be used every 3’-4’ along the supports, with a minimum of four clips on small sections. CC-Clips not only add safety for the employees using the grating, but also improve on the deflection.

Home About Products Links Contact Site Map